Текущее время: 28 мар 2024, 20:05

Калининград & ХОББИ

Занятие любимым хобби - это путь к счастливой жизни!

Урок 28. Управление освещением, розетками по WIFI на ESP8266

Обучение с нуля, шаг за шагом.
Аватар пользователя
 
Сообщений: 799
Зарегистрирован: 27 мар 2013, 22:12

Урок 28. Управление освещением, розетками по WIFI на ESP8266

Сообщение -=dp=- » 29 мар 2018, 16:41

Урок 28. Управление освещением и розетками по WIFI на ESP8266

Для данного практического занятия нам понадобятся:
1 - модуль ESP8266-01
2 - модули реле
3 - понижающий преобразователь напряжения DC-DC step down
4 - конденсатор 2000 мкФ 10 В
5 - макетная плата с набором проводов
6 - кабель microUSB > USB



Подключаем все детали по схеме на рисунке ниже:

WIFI upravlenie.jpg
Управление освещением, розетками по WIFI на ESP8266



Аватар пользователя
 
Сообщений: 799
Зарегистрирован: 27 мар 2013, 22:12

Re: Урок 28. Управление освещением, розетками по WIFI на ESP

Сообщение -=dp=- » 29 мар 2018, 16:44

Cкетч для ESP8266-01 выложу немного позже.

Следите за обновлениями тем на форуме :!:

А тем временем, мы стали еще на один шаг ближе к завершению создания проекта Умный дом ;) 8-) :ugeek:

Smart Home 7.jpg
Умный дом на Ардуино



Аватар пользователя
 
Сообщений: 799
Зарегистрирован: 27 мар 2013, 22:12

Re: Урок 28. Управление освещением, розетками по WIFI на ESP

Сообщение -=dp=- » 05 мар 2019, 21:36

Выкладываю долгожданный скетч wifi розетка ;)

Код: выделить все
// Load Wi-Fi library
#include <ESP8266WiFi.h>

// Replace with your network credentials
const char* ssid     = "WIFI розетка";
const char* password = "Password";
IPAddress ip(192,168,4,20);
IPAddress gateway(192,168,4,1);
IPAddress subnet(255,255,255,0);

// Set web server port number to 80
WiFiServer server(80);

// Variable to store the HTTP request
String header;

// Auxiliar variables to store the current output state
String output5State = "off";
String output4State = "off";
String State2 = "&#1042;&#1050;&#1051;";
String State1 = "&#1042;&#1067;&#1050;&#1051;";
String State4 = "&#1042;&#1050;&#1051;";
String State3 = "&#1042;&#1067;&#1050;&#1051;";
String Sta1 = "";
String Sta2 = "";

// Assign output variables to GPIO pins
const int out0 = 0;
const int out1 = 1;
const int out2 = 2;

void setup() {
  Serial.begin(9600);
  // Initialize the output variables as outputs
  pinMode(out0, OUTPUT);
  pinMode(out1, OUTPUT);
  pinMode(out2, OUTPUT);
  // Set outputs to LOW
  digitalWrite(out0, HIGH);
  digitalWrite(out1, HIGH);
  digitalWrite(out2, HIGH);

  // Connect to Wi-Fi network with SSID and password
  Serial.print("Connecting to ");
  Serial.println(ssid);
 WiFi.config(ip, gateway, subnet);
 WiFi.begin(ssid, password);
 while (WiFi.status() != WL_CONNECTED) {
   delay(500);
   Serial.print(".");
  }
//WiFi.softAP(ssid, password);
  // Print local IP address and start web server
  Serial.println("");
  Serial.println("WiFi connected.");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
  server.begin();
}

void loop(){
  WiFiClient client = server.available();   // Listen for incoming clients

  if (client) {                             // If a new client connects,
    Serial.println("New Client.");          // print a message out in the serial port
    String currentLine = "";                // make a String to hold incoming data from the client
    while (client.connected()) {            // loop while the client's connected
      if (client.available()) {             // if there's bytes to read from the client,
        char c = client.read();             // read a byte, then
        Serial.write(c);                    // print it out the serial monitor
        header += c;
        if (c == '\n') {                    // if the byte is a newline character
          // if the current line is blank, you got two newline characters in a row.
          // that's the end of the client HTTP request, so send a response:
          if (currentLine.length() == 0) {
            // HTTP headers always start with a response code (e.g. HTTP/1.1 200 OK)
            // and a content-type so the client knows what's coming, then a blank line:
            client.println("HTTP/1.1 200 OK");
            client.println("Content-type:text/html");
            client.println("Connection: close");
            client.println();
           
            // turns the GPIOs on and off
            if (header.indexOf("GET /5/on") >= 0) {
              Serial.println("GPIO 5 on");
              output5State = "on";
              Sta1 = State1;
              digitalWrite(out0, LOW);
            } else if (header.indexOf("GET /5/off") >= 0) {
              Serial.println("GPIO 5 off");
              output5State = "off";
              Sta1 = State2;
              digitalWrite(out0, HIGH);
            } else if (header.indexOf("GET /4/on") >= 0) {
              Serial.println("GPIO 4 on");
              output4State = "on";
              Sta2 = State1;
              digitalWrite(out1, LOW);
              digitalWrite(out2, LOW);
            } else if (header.indexOf("GET /4/off") >= 0) {
              Serial.println("GPIO 4 off");
              output4State = "off";
              Sta2 = State2;
              digitalWrite(out1, HIGH);
              digitalWrite(out2, HIGH);
            }
           
            // Display the HTML web page
            client.println("<!DOCTYPE html><html>");
            client.println("<head><meta name=\"viewport\" content=\"width=device-width, initial-scale=1\">");
     

            client.println("<link rel=\"icon\" href=\"data:,\">");
            // CSS to style the on/off buttons
            // Feel free to change the background-color and font-size attributes to fit your preferences
            client.println("<style>html { font-family: Helvetica; display: inline-block; margin: 0px auto; text-align: center;}");
            client.println(".button { border-radius: 20px; background-color: #DC143C; border: none; color: white; padding: 16px 40px;");
            client.println("text-decoration: none; font-size: 30px; margin: 2px; cursor: pointer;}");
            client.println(".button2 {border-radius: 20px; background-color: #32CD32;}</style></head>");
           
            // Web Page Heading
            client.println("<body bgcolor=#E0FFFF><h1>&#1056;&#1054;&#1047;&#1045;&#1058;&#1050;&#1040;</h1>");
           
            // Display current state, and ON/OFF buttons for GPIO 5 
            client.println("<p>&#1056;&#1054;&#1047;&#1045;&#1058;&#1050;&#1040;-1 " + Sta1 + "</p>");
            // If the output5State is off, it displays the ON button       
            if (output5State=="off") {
              client.println("<p><a href=\"/5/on\"><button class=\"button\">&#1042;&#1067;&#1050;&#1051;</button></a></p>");
            } else {
              client.println("<p><a href=\"/5/off\"><button class=\"button button2\">&#1042;&#1050;&#1051;</button></a></p>");
            }
               
            // Display current state, and ON/OFF buttons for GPIO 4 
            client.println("<p>&#1056;&#1054;&#1047;&#1045;&#1058;&#1050;&#1040;-2 " + Sta2 + "</p>");
            // If the output4State is off, it displays the ON button       
            if (output4State=="off") {
              client.println("<p><a href=\"/4/on\"><button class=\"button\">&#1042;&#1067;&#1050;&#1051;</button></a></p>");
            } else {
              client.println("<p><a href=\"/4/off\"><button class=\"button button2\">&#1042;&#1050;&#1051;</button></a></p>");
            }
            client.println("<br><br><br><a href=\"http://192.168.4.1">BO3BPAT</a></body></html>");
           
            // The HTTP response ends with another blank line
            client.println();
            // Break out of the while loop
            break;
          } else { // if you got a newline, then clear currentLine
            currentLine = "";
          }
        } else if (c != '\r') {  // if you got anything else but a carriage return character,
          currentLine += c;      // add it to the end of the currentLine
        }
      }
    }
    // Clear the header variable
    header = "";
    // Close the connection
    client.stop();
    Serial.println("Client disconnected.");
    Serial.println("");
  }
}






Вернуться в Обучение Ардуино

Кто сейчас на форуме

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 1